Renovating a house can be a great way to improve the look and feel of your home. However, it’s important to do so in a way that doesn’t produce too much residue or damage. In this article, we will discuss some tips on how to renovate your house without causing too many problems!


You should know that there’s a way to insulate your home without doing too much damage. A huge way to ensure Home comfort is not to remove drywall and insulation in order to install new insulation. It’s messy, and it can create a lot of dust and residue.

There are insulating blankets that you can buy which will fit snugly around your home without having to remove any panels or drywall. These insulating blankets have an R-value of up to 22, which is really good when compared to the standard R-values of other types of insulation. If you’re looking for a way to make your home more comfortable this winter, then this may be the best option for you! Not only will you avoid creating a mess, but your home will also be more energy-efficient.


Put plastic wraps on every single place you want to protect. Whenever you’re renovating, you should do this with the following: 

  • walls
  • floors
  • furniture
  • ceilings
  • countertops 
  • kitchen appliances 
  • sinks 
  • bathtubs 
  • toilet 
  • washing machines 
  • water heaters 

It is a good way to avoid excess paint or plaster getting on surfaces that don’t need it. If you’re using any kind of chemical products as part of your renovation project, using wraps will also help keep the smell contained.

When everything’s all wrapped up, take a step back and admire your handiwork. You’ve just renovated your house without creating too much mess and damage! Well done!

If you are looking to renovate your home without producing too much residue and damage, using wraps is definitely the way to go! Plastic wrap can be placed over anything you need and it will make your life much easier. 


It’s essential that you protect your thresholds when renovating your house. You don’t want to produce too much residue and damage the floors and walls. One way to do this is by making threshold shields.

To make a threshold shield, you’ll need plywood, a ruler or tape measure, a circular saw, high-grit sandpaper, and stain or sealant (optional).

Cut a piece of plywood that’s big enough to cover the entire threshold. Then, use a ruler or tape measure to mark out where the door will hit the shield. Use a circular saw to cut out that section of the plywood. If you’re using stain or sealant, now is the time to apply it.

Finally, use high-grit sandpaper to smooth out the edges of the shield. You don’t want anyone getting cut on them! Place the shield over the threshold and you’re good to go. 


Temporary walls can be created by sealing off rooms with plastic sheeting and duct tape. This will help to contain the mess and fumes from the renovation project. It is important to make sure that all cracks and openings are sealed so that no dust or debris can escape. Leave a small opening in the sheeting so that you can get in and out of the room easily. Make sure to have plenty of ventilation in the other rooms of the house, as well as in the sealed-off room, to keep air circulating.


You have to protect your floors as well as you can. Wear old clothes and shoes that you don’t mind getting dirty. Try not to track the residue all through your house. 

Cover doorways with plastic sheeting taped to the molding so that it doesn’t get on the floor. Protect any woodwork or floors with drop cloths. Make sure there is a path for you to walk without creating new messes. If possible, try to work in one area at a time and clean as you go.

When you’re finished for the day, carefully collect your materials and put them away so you’re ready to start again the next day. Sweep up any residue that may have landed.


You have to keep dust under control when renovating your house. It is not only annoying, it can also be harmful to your health. One way to reduce the amount of dust produced during a renovation project is to drive it out before you start. This means getting rid of all the dirt and debris that may be inside and outside the building.

Use a leaf blower or a fan to blow the dust away from the building. Make sure you cover your nose and mouth when doing this. You can also sweep or hose down the area around the building before starting work.

Renovation is a long and hard process so making it easier by producing less residue and damage is important. Don’t remove drywall when insulating and use wraps around everything and make threshold shields. Create temporary walls to seal off rooms and make protected pathways. Finally, make sure that dust doesn’t stay inside. You’ll finish the job much faster!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s