COMMON CAUSES BEHIND LEAKY WATER HEATERS AND HOW TO AVOID THEM?

Leaking water heaters are a problem for homeowners in Indianapolis, Indiana. Leaks can cause water damage, not to mention running out of hot water when you need it in some cases, and fixing it takes time and money. If owners don’t know where their equipment leaks are coming from, it is more difficult to deal with them. Several types of failure will pass through the water, and each type of failure will have different consequences for the water heater. It is important to understand the difference between each type of leak.

 

Top Water Heater Repair in Orange County to homeowners with important information about leaks. Our plumber explained in detail how water heater leaks occur so that homeowners can better understand how to stop them. Also, check where the leak is and what it means in the water heater.

 

CAUSES OF WATER HEATER LEAKS

 

Water heaters provide hot water to all the equipment in your home. A leaking water heater will make this more difficult to complete. There are many reasons for a leak, and all of them have different implications for the system. However, homeowners are often unaware of the reason for the leak, making repairs more difficult.

Some types of leaks require a new water heater. However, many other devices can be repaired. These are the most common causes of leaks.

 

ANODE ROD

The anode rod is an important part of a water heater because it attracts corrosive substances. This ensures that corrosion only occurs on the anode rod and not on the tank itself to prevent leakage. Over time, the anode rod becomes very corroded and no longer exists. In this case, water is leaking from where the anode rod is located. Replace the rods quickly to avoid this type of leakage.

 

COLLECTION OF SEDIMENT

As the water heater does its daily job, it builds up deposits at the bottom of the tank. Homeowners should remove these deposits to prevent cracks. If the sediment stays there for a long time, the water tank will eventually wear out. Then the water seeps through these openings. Drain the water from the water heater annually to clean up sediment and prevent leaks.

 

THE PRESSURE IS TOO MUCH. 

In a water heater, the pressure is natural and normal. However, if the pressure is too high, it will put pressure on the fuel tank and cause a leak. The pressure increases when the water temperature is too high or the water entering the house begins to become at high pressure. If the pressure in the water heater is too high, water will escape from cracks or openings in the appliance.

 

INPUT AND OUTPUT ARE CONNECTED.

Coldwater enters the water heater through the inlet fitting and hot water enters the appliance through the outlet fitting. These components loosen over time and allow water to enter or exit the water heater. Leaks in these water heaters usually require tightening the loose parts, but not many other parts.

 

OLD TANK

With regular maintenance and inspection, the tank water heater can be used for approximately 15 years. When the equipment approaches this mark, the system often begins to malfunction. The parts weaken and the parts do not fit together tightly, resulting in more frequent leaks. At the end of the water heater’s life, rust formation increases. If it rusts, the tank will leak and you will need to replace your water heater.

 

DRAIN VALVE

When a homeowner needs to clean and  wants a water heater repaired in San Diego, a drain valve can drain the water. This part will loosen over time and cause small leaks in the water heater. In rare cases, failure of the drain valve may also occur. If you think there is a problem with a part, consult a plumber. Plumbing unions will advise if the part has a real problem, will it be repaired, or if there is another problem causing the leak.

 

PREVENT WATER HEATER LEAKS IN YOUR HOME

As with most plumbing problems, your water heater is less likely to leak if you take the proper precautions. Homeowners have more control over water heater problems than they realize. This means that most leaks can be adequately prevented. In the event of an accidental leak, water damage can affect walls, floors, and important objects. Even if the leak is not repaired, 

 

flooding is likely.

Take these precautions to avoid damaging your home due to leaks. They ensure that the water heater remains waterproof as long as possible.

 

QUICK RESPONSE

It is important to react as quickly as possible to leaks in your water heater. This minimizes water damage. Find the leak and call a plumber. If you already know where the leak started, you can point the plumber in the right direction. This further reduces the time it takes for a leak to cause serious damage. In addition, since the fuel tank can only withstand such a high pressure, the longer the pressure leak, the more dangerous it is.

 

EMPTY AND CLEAN THE WATER TANK

Regularly empty the water tank and remove all sediment. The longer the sediment at the bottom of the tank, the more fragile it is. The drain valve drains the water, so you can clean it. Use an aqueous solution of bleach to kill mould. This will improve the quality of the water.

 

CHECK YOUR WATER HEATER OFTEN

Keep your eyes on the water heater. Knowing how your water heater looks and behaves when it is running can help you identify when the problem occurs. In most cases, a puddle of water will form under or around the water heater, causing a leak almost immediately.

 

CHECKING FOR LEAKS

If there is an active leak, the plumbing suit will fix it. If you learn that a leak is imminent in an area, he will notify homeowners and provide advice on how best to handle the situation.

 

TIGHTEN THE LOOSE PARTS

Finally, if you find any loose parts on the water heater, be sure to tighten them. It is important to check the connections frequently to reduce the possibility of leaks in the water heater. If you don’t have a wrench nearby, tighten the set by hand.

 

Author Bio:- Jacqueline Lewis

 Jacqueline is a content marketing manager who formerly worked at Cali’s Choice Plumbing & Restoration. She is a writer, editor, and content strategist for plumbing services. Making her knowledge and skills a power, she amplifies the readers’ knowledge about the ways of water leak and slab leak detection and their reciprocation. 

Through her articles, she shares the most successful tactics and strategies of slab leak repair, mitigating blockages through Hydro Jetting, and AC & heater installation tips to the audience.

 

Facebook: https://www.facebook.com/CalisChoicePlumbingRestoration

 

Twitter:https://twitter.com/CalisChoice

HOW MUCH DOES WATER DAMAGE RESTORATION COST IN 2021?

FLOOD REPAIR COST PER ROOM

The cost of irrigation is determined by the damaged part, as it affects the necessary repairs. Different areas of the house usually require emergency restoration service of water damage. Below you will see the average repair cost based on the damaged room in your home.

BATHROOM REPAIR PRICE

You can expect to pay an average is $ 2,500 to $ 4,500 to clean toilet stains. Bathrooms are a common place where this happens because there are a lot of pipes in the walls and several plumbing fixtures that can leak or overflow. For some reason, bathrooms tend to be inexpensive compared to other rooms in the house. First, they tend to be smaller areas. They usually have tile or vinyl floors and are easier to repair than wood and carpet. In most cases, bathroom repairs include air vents, small drywall, ceiling, and floor repairs.

FLOODED LAUNDRY ROOM REPAIR

If a laundry room is a Find Water Damage Restoration Area, the average cost is the same as a bathroom and should be between $ 2,500 and $ 5,500. Laundry areas tend to be slightly larger than bathrooms, but generally have less plumbing and fixtures in the space. The most common cause of such damage in laundry rooms is a washing machine overflow or a leaking washing machine hose. Floor repairs, drywall repairs, and, in certain circumstances, basic electrical work are common in this area.

FLOODED LIVING ROOM REPAIR 

The average cost of maintaining water in a salon is between $ 3,000 and $ 6,000. The main reason for the increase in costs is that living rooms tend to have a larger area, can cause overhead damage, and generally increase the cost of maintaining floors. The most common causes of such damage in living rooms are pipe damage and roof leaks. The most common repairs are repairs to ceilings, plasterboard, and floors. In some cases, floors or furniture need to be repaired or replaced.

KITCHEN FLOOD REPAIR

 The kitchen is one of the most expensive areas for flood repairs. The repairs will cost between $ 3,000 and $ 8,000. Kitchen repairs can be expensive because these types of accidents require multiple repairs. This type of damage in the kitchen can be caused by water infiltration, broken pipes on appliances, and air leaks. Kitchen repairs typically include floors, drywall, ceilings, and appliances.

BASEMENT WATER REPAIR COST

 The cost of repairing basements damaged by flooding ranges from low to high, but on average, most homeowners pay between $ 3,000 and $ 10,000. In most cases, this damage to your basement is caused by flooding, but it can also happen if overhead lines rupture or leak. The cost of cleaning the basement is high, and a small part of the unfinished basement has a concrete floor at the bottom of the scale, and the finished basement is used more in drywall, floors, and ceiling tiles. Maintenance ranges from a simple extraction to major structural and electrical maintenance.

COST OF WATER EXTRACTION BY TYPE OF WATER

The first step is to remove the moisture. This includes removing it from any water source as a flood defence or water source. It reduces the risk of damage to real estate structures. The extracted water can be used for irrigation as well as other possible uses. The source is a factor that affects the amount you can pay for the drawer service.

There are three types of flooding: clean, grey, and black. Gray, also called stain, occurs in tubs, sinks, washing machines, etc., and contains small amounts of contaminants but no faeces. Ingestion can cause health problems, but may not be fatal. The black water comes alternately from sewers and toilets and is contaminated with faeces. Its consumption can have serious health effects. Exposure can also cause structural Find Water Damage Restoration Area to buildings. Clean water does not contain chemicals or droppings, but exposure can cause structural damage to buildings. This is the easiest type to extract because it requires fewer security measures. 

The price of supply water per square foot ranges from $ 3.50 to $ 7.25, depending on the volume, equipment used, and the area affected.

FLOOD SIGNS

Not all flood damage is immediately apparent. While damage can be seen after a severe storm, some types of moisture problems can develop within months. Paying attention to the signs as early as possible is essential to reduce lasting effects. The longer the structure is exposed to a humid environment, the greater the extent of the damage.

Peeling and cracking of paint on walls and ceilings are significant signs of Looking For water damage in Anaheim. As moisture builds up on drywall, it expands and compresses the paint on the surface. You may also notice discolouration of the paint as water can contaminate the wall paint.

Another sign to watch out for is that the flooring will warp in contact with water. If the point hits a corner or a wall in the room, the damage to the floor can be ignored for a while. If you see warping in wood and vinyl floors, they may be exposed. Another common sign is to recognize wet areas in the carpet.

Significant deflection of walls and ceilings indicates the need for repair service. When saturated with water, drywall loosens. Mould visible on the walls is another sign, but not everyone is aware of mould in their home. Contact with mould before it is discovered can cause a distinct musty odor or cause allergies. This odor is particularly irritating in places like basements. The smell is similar to the smell of damp, mouldy clothes. Unfortunately, it’s not uncommon for homeowners to spot and confuse mould growth.

If your water bill goes up for no apparent reason, a leak can cause potential Looking For water damage in Anaheim. For reference, water companies typically provide graphs that show average usage over the past month. In addition, if you hear the sound of running water, if the water source is not found, serious leaks may occur, so measures should be taken immediately to prevent further damage.

Bad weather caused extensive damage to homes and often caused severe flooding. One of the hardest things about storm damage is losing control over nature. Natural disasters such as hurricanes and tornadoes can leave large amounts of water behind. 

Equipment that rests on pipes, plumbing, or gaskets can cause and look For water damage in Anaheim. Your refrigerator and dishwasher may start to leak and need repair. Other potential sources of leaks include air conditioners and water heaters. HVAC systems may need repairs to prevent leaks or flooding. 

Author Bio:- Walter Mealey

Walter is a marketing manager at EZ Flood Restoration USA. With extensive knowledge of water damage and flood restoration, he writes articles about the cause and remedy of Mold growth, remodeling Kitchen and Bathroom with latest plumbing innovation and technology, how to Crawl Space after flood, and tips to get rid of Fire and Smoke Damage. Stay updated with recent articles and grab comprehensive knowledge of common ways the flood damage affects your home and business and what proactive steps you take to overcome it as well as modern tools that can keep you alert about the happening of natural and accidental uncertainties.

WHICH IMMEDIATE STEPS SHOULD BE TAKEN IF YOU DETECT SLAB LEAKS?

A slab leak once detected has to be repaired promptly to reduce the damage caused by it. The age, materials, and condition of a home’s plumbing system will determine if a part of plumbing has to be repaired or replaced, or if the entire plumbing system needs to be re-piped. This big decision you make would then result in calling for professionals who could fix the slab leaks.  

So in this article, we will be discussing the different ways to repair slab leaks and how to prevent them. These steps could help with the repair process and also serve as an advice to protect the plumbing structure from any sort of leaks.

1. Re piping

Most of the time digging underground is not the option to go for and re routing or re piping becomes a better option altogether. It might serve as a less disruptive solution and more quick to put together. This worlds well if just a small section of the pipe is the one that has a problem. For top slab leak repair Huntington Beach, click here. In some cases, such as when a home’s plumbing lines are encased in concrete and cannot be reached without destroying the slab, it may be best to re-pipe the whole house. The re piping will let the plumber work through the construct without you having to move out while the work is done. The work once done could just switch off the old lines with new lines switched on consequently.  

2. Breaking through the slab

Sometimes the easiest and most useful option is to break through the slab and understand the problem down there under the concrete. This is quoted as one of the most expensive options and is also disruptive on a whole. Because of this nature, it is often sorted as the last option available for fixing the slab leak. The slabs in themselves are so different depending on the company that manufactured them and also the soil type and depth playing a major role in it. And some of the plumbers and companies are of the belief that slabs should never be cut through as this could sabotage the entire plumbing infrastructure. Adding to this is the list of disadvantages the homeowners have to bear with this option. The first is that you must relocate while the work is being done because the water will be turned off, the noise from jackhammers and saws will be loud, and the dust in the air will need you to cover everything. The flooring is also widely affected adding to multiple costs. So this option of repair for a slab leak is least assorted with.

3. Tunneling

The process of tunneling beneath the slab comes with a list of benefits like no need for separate lodging as the residents could stay at home, all of the working and the subsequent mess is just on the outside, and the budget of it all is the least expensive of all. Tunneling is usually opted by a homeowner who has very expensive flooring and does not want to risk the breaking down of the slab destroying the room and floorings. 

The professionals like plumbers and engineers usually do the digging and create tunnels that could extend beneath the house and keep the structural integrity. We fill the tunnel with the earth that was previously removed after the new plumbing has been fitted and tested. There is dampening of the soil as they go and there is the use of metal tamps to firmly pound it. For top slab leak repair Huntington beach, click here.  

4. Pipe lining and pipe bursting

Pipe lining is a great option for homeowners because this doesn’t include any sort of trenching or digging in the spot. The broken water lines are usually repaired by looking through the broken pile and then there is the addition of the epoxy coating hardened into the new pipe. To find slab leak repair Garden Grove, click here. The leaks which occur afterward are more difficult to repair as there is no heat that can be used. This trenchless solution could be used when the damage is small and manageable.

How to prevent any further leaks?

1. Keep the soil moist: Even if the location and climate don’t support this phenomenon, keeping the soil moist will help in working through the gaps of the soil. Just the use of a normal hose for keeping the soil around the house moist by watering it. The key here is to do it at the right intervals and not to overdo it.

2. Take special attention to drain cleaners: The drain cleaners are usually used down the structure to clean but with chemical stains, it could be harsh on the plumbing lines and architecture. 

3. Check the pH of the water: If the water of your property is acidic it actually acts as the same chemicals down the drain and affects the plumbing architecture as a whole. 

4. Checking the water pressure: the house water pressure needs to be checked so that the stress that falls on the pipes and structure is low and there is no further creation of spots.  

5. Inspections: Regular maintenance by professionals is what needs to be done to detect any leaks beforehand to promptly repair or replace them in time.

So these are the different ways in which slab leaks could be repaired in time and the different ways in which you could protect the plumbing architecture of homes and avoid getting any leaks at all. For any top slab leak repair Huntington Beach contact here. The professionals and plumbing team could help in detecting, diagnosing, and finally repairing the leak. Sometimes there is a replacement that is needed and henceforth prevention is always better than the cure itself.

Author Bio:- Aimee Grace

Aimee is a marketing manager at EZ Plumbing & Restoration. She is very passionate in writing about discrete plumbing services and leakage detection as well as repair solutions.  Her vision is to educate people about the consequences of water and slab leaks at home or office and what they should do to repair them to avoid further water damage as well as property damage. 

Innovations have paved a way for smart devices to lead a convenient life. Plumbing industry is no different but only few people know about various tools used to fix the leakages. Stay tuned with the recent articles to know all about how to find water damage, slab leak, clogging, and ways to repair them, installation of new HVAC appliances in San Diego.

WHAT ARE THE MAJOR CAUSES OF WATER LEAKS, AND WHAT SHOULD YOU DO IF YOU FIND ONE?

HOW TO DETERMINE IF A LEAK IS NOT COMING FROM THE ROOF

Make sure the incoming water source is the result of roof damage and not a problem with other components in your home. If you have leaks in your bathroom or kitchen, it is best to approach water Leak Detection service in faucets, toilets, and other equipment. However, if a wet area is on the floor or wall near the radiator, the central heating system may leak.

If there is a leak in the ceiling, you can determine the cause by determining the severity of the leak and the discoloration. Brown spots or blackening? This means that the water is dirty and it can come from an external source, i.e. a leak on the roof. Or, if the leaking water is clear, it indicates that the leak is coming from the house. It could be a plumbing problem.

They are usually the cause of leaks in your home, so check your windows. Often, leaks in windows can damage sealing components due to improper installation and wear of parts. If water gets into the windows between the panes, the glass may not be properly sealed. However, if you see spots on the top of the windowsill, water can run down the walls.

 Leaks not only increase water bills, but the most obvious problem is that they damage your home. No matter the size of the leak, you will pay for the water or the damage. Follow our procedures to understand the possible causes of leaks in your home, how to identify leaks, the consequences of not fixing the leak, when to hire a plumber, and how much it will cost to fix it.

WHAT ARE THE MOST COMMON CAUSES OF LEAKS?

CLOGGED LEAK

Hair, stains, and debris can block the flow of water through the drain, but over time the drain can rupture or rupture. Untreated clogs increase pressure in the drain hose and water can force and damage the hose.

TOILET LEAK

20 to 35% of residential toilets are leaking. Although very common, there are many reasons why toilet Best Water Leak Detection In Orange County and can be overlooked. If you hear the sound of the toilet flushing in your bathroom, it means your bathroom is leaking. This is due to damage to the baffle or leaking water flush valve seals.

Another problem could be the damage to the seal under the toilet. This type of leak usually goes undetected unless the bathroom smells bad. Check the screws and bolts around the bathroom floor for rust or mildew. Make sure the toilet is properly installed as the gasket may leak if the toilet is loose.

HIGH WATER PRESSURE

High water pressure can cause significant damage to pipelines. The average water pressure should be 60 psi per square inch, and your home plumbing system is designed to withstand up to 80 psi.

High water pressure is usually beyond your control. Living on hills, skyscrapers, or near fire hydrants can lead to high water pressure. Talk to a plumber about how to adjust the water pressure in your home.

CORROSION PIPE

Corrosion in pipelines is an inevitable problem. You can insulate the metal to make it durable, but the pipe will eventually corrode. As the pipeline corrodes, pinholes begin to form and small leaks occur in the pipeline.

Corrosion in pipelines usually occurs because the pH value of the water is either too high or too low. PH is a measure of the acidic content of water. To check the pH of your water, purchase a pH test strip from your drop-in center. It is recommended that the water has a pH of 6.5 to 8.5. If you have high or low pH water, install a water treatment tool to balance the pH level.

WHEN TO CALL A PLUMBER TO FIX A LEAK?

With the basic knowledge and guidance, you can perform these simple repairs to prevent leaks in your plumbing system.

FAUCET LEAK

Whether indoors or outdoors, the majority of leaky faucets are due to old faucet cleaners. This small, round piece of rubber can be found by removing the valve and valve stem. If the faucet gasket appears worn or deteriorated, it can be replaced at any hardware store. Always buy a faucet gasket that matches the old one. Otherwise, it is not appropriate. It is also important to make outdoor faucets in winter to avoid faucet leaks.

TOILET LEAK

Currently, some leaky toilets require a plumber. But, as we said, there are many reasons for toilet leaks, some of which are easy to fix. In this case, the leak in the toilet may be due to a damaged baffle or a faulty water injection valve.

Check the water level in the toilet and water tank. Another way is to place the food coloring in the double boiler, wait 20 minutes, and then check to see if the food coloring is seeping into the bathroom. If there’s food coloring in the bathroom, now is the time to replace the baffle and fill valve. All of these can be purchased at your nearest hardware store with a simple operating procedure.

COMPLEX LEAKS

When your water supply system starts to leak, your first reaction is to fix the problem and avoid worrying about plumbing costs. Many videos on YouTube show you how to fix your plumbing system, but you may experience some issues with your hands, and the cost of these issues can be much higher than the cost of your plumbing.

HIRE EXPERTS

Do not delay in fixing this leak! It doesn’t matter if your house is leaking, consult an Out Of Top Water Leak Repair In Orange County. From water heaters to tubs and showers, we’re here to help. Our experience in the home service industry enables our employees to meet customer needs in a more sophisticated and efficient manner.

Author Bio:- Laura Harnes

Laura is a marketing manager at All Star Plumbing & Restoration. With years of experience in the plumbing industry, she loves to create awareness about the causes, problems, and repair solutions of water damage and slab leak. She shares expert tips to lower utility bills and keep your AC, heater, and other appliances in optimum condition leading to longer lifespan.

Check all the recent articles and know everything about water damage Repair, slab leak repair, tools to remove clogging, and HVAC appliances installation, maintenance, and repair.

Facebook: https://www.facebook.com/AllStarPlumbingService

Twitter: https://twitter.com/All_Plumbers

5 ESSENTIAL THINGS YOU SHOULD KNOW BEFORE BUYING A HOUSE

Buying a new house hast to be one of the most joyous and satisfying moments a person can hope to have in life. However, the very gravity of this situation, the substantial amount of money you intend to invest, and all the fond memories you intend to make in your new home put too many important things at stake to approach this task lightly.

So, let us take a look then at a couple of important things you should know before buying a new house to make your next purchase into a safe haven you and your family have always dreamed of.

A GOOD LOCATION IS A KEY

The property you are going to buy may have some smaller or bigger deficiencies some of them easier to repair than others. However, the poor location can’t be fixed with all the money and effort in the world. That is why, before spending any money, be sure to double-check the neighborhood, access to various amenities and major traffic lines, vicinity to industrial centers that may be causing excessive pollution levels, etc. All these things can dramatically impact your quality of life so it’s good to put them as the number one priority.

DOWN PAYMENT IS NOT THE ONLY CASH YOU WILL NEED TO SHELL OUT

Home-buying is a process riddled with various expenses that can take quite a heavy toll on the future owner’s budget if the funds are not set aside some time ahead. These expenses cover everything ranging from closing costs and one year’s worth of home insurance to small repairs, impromptu Home Depot runs, and other smaller expenditures that come with moving in. Learning more about the prices and saving in advance will help you save your credit cards from unnecessary debt when things finally start rolling.

TOO MANY PEOPLE WILL TRY TO ROB YOU

The budgeting we have mentioned above will be made considerably easier if you manage to avoid some of the unnecessary and underhanded costs that come along the way.  Take for example junk insurance which is essentially a set of overpriced premiums you are asked to pay as a part of the contract but are essentially useless to you. And then there are expensive materials, bundled services you don’t need, and all other expenditures that are explained in the fine print. If you want to avoid excessive debts, your job will be to read through all of them.

BE VERY CLEAR ABOUT WHAT YOU WANT AND WHERE YOU’RE HEADED

Going into home-buying without knowing exactly what you want and what you need only drags out the process, wears you out, and stacks up the associated expenses. That is why you absolutely need to have a very clear list of requirements you will pass down to the realtor. Also, it is highly advisable to imagine where you and your family will be in 10 to 20 years. The necessities you have now will undoubtedly change as time goes by and trying to guess these changes correctly can make your purchase much more worthwhile.

THE CONDITION OF THE LOCAL REAL ESTATE MARKET

These simple facts will put much of your future decisions into perspective. The complete list, of course, is hard to comply but you can start the research by checking the average age and price of the properties in the area, demand for the homes and inventories for sale, the competition you might be facing, and plans for future developments. Knowing these things can turn a perfect purchase into a waste of money and an ugly duckling into a steal. Also, you will get a much better idea about the money you are ready to spend.

We hope these few tips will help you make your future property hunt much easier and help you find the home you and your family will enjoy in many years to come. Even if we put all the emotions aside, buying a home puts a great deal of money on the table and an even larger responsibility on your shoulders – you need to make sure everything’s all right. Now, you know where to start.

Guest Contributor: Diana Smith

CONSIDER THESE 5 FACTORS BEFORE INSTALLING A WATER HEATER

We all have Water heaters installed in our homes. So it may not be the first thing that comes to mind right now, but it might be the essential item you think about in the new year. Consider you waking up on a chilly morning to get ready for work, hoping to take a shower with warm, comfortable water. When you switch on the shower, you are confronted with ice-cold water that shoots shivers up your spine! And it won’t only be your morning shower that suffers from a lack of hot water.

Day-to-day duties such as laundry and dish washing may be impossible to do. Worse, you might not even have enough hot water to cook yourself a lovely, warm meal. If your present water heater is unable to meet any of these requirements, installation is suddenly required.

WHERE CAN I FIND OUT IF I NEED A NEW WATER HEATER?

If you’re unsure if now is the time for water heater installation, it’s a good idea to think about it, especially if you have an older water heater that’s more likely to break down.

·   You are relocating to a new house and want to guarantee that your heating requirements are satisfied.

·       Hot water is polluted and poses a significant health risk.

·       Looking for a water heater that is better suited to your family’s needs?

·        A traditional water heater’s tank is causing you too much bother (leaks, cracks, corrosion, etc.)

If any of these conditions you are facing, it’s time to contact EZ Plumbing and restoration. You can choose the water heater that will be the best match for your house.

THINGS TO THINK ABOUT WHEN REPLACING YOUR WATER HEATER

Finding the correct water heater may provide you with many long-term benefits, such as decreased energy expenses and longer-lasting water heating capabilities. If you want to avoid going a single day without hot water this autumn and winter, please examine the following five critical aspects before investing in the local water heater:

· HOT WATER REQUIREMENTS:

Everyone needs hot water for bathing in their home, but what about you? What is the total number of plumbing fittings in your home? Do you live in a house with a lot of people? Before you do anything else, you should think about your specific hot water requirements. The more you know about what you want from a new water heater, the clearer your path will be.

· WATER HEATER TYPE:

You now have a more significant assortment of water heating types to choose from. You don’t have to settle for a standard water heater anymore. All kinds of water heaters have their own set of advantages and disadvantages. A tankless water heater, for example, has an excellent efficiency rate of 96 percent and may save you $100 on yearly running costs, but it has a higher installation cost when compared to other types.

·  ENERGY EFFICIENCY:

Are you sick of paying exorbitant energy bills? If this is the case, you should think about the efficiency of your new water heater. Even if you install a new water heater in your house, it may not be too kind to your energy bills. How can you install water heating in your home that would offer hot water for all uses without increasing your energy bills? Solar water heaters utilize less fuel to heat water, resulting in hot water that reduces your carbon footprint and lowers your utility expenses.

·  FUEL TYPE:

Gas and electricity are the most prevalent forms of fuel for water heaters. Today, while some contemporary water heaters are fueled by solar energy or propane. When considering replacing your present water heater, it is critical to evaluate the fuel type. For example, suppose you want to return an electric water heater costing you too much money in energy bills. In that case, you should consider a gas water heater instead, which is more energy-efficient.

·  WATER HEATER SIZE:

The requirement of hot water and the size of the water heater frequently go simultaneously. Before any installation work begins, your contractor must take measurements and check your home to ensure that your selected kind will fit inside the actual area of your home. Choosing the incorrect sized water heater can result in poor energy efficiency. An increased water heater replacement and a general shortage of hot water will not suit anyone’s demands.

WHY CHOOSE EZ PLUMBING AND RESTORATION FOR WATER HEATER INSTALLATION?

While hot water is necessary at all times of the year, you also want to avoid installing a faulty water heater. In that scenario, you should contact us right away for water heater installation. After all, if you do not seek expert assistance, you may wind up with an inefficient water heater and will cost you even more money in water heater repair. Worse, installing the incorrect model poses a safety concern since it is more likely to generate carbon monoxide, which will spread throughout your home.

Fortunately, our plumbing contractors can offer you service that will ensure you have the appropriate water heater in your house. There will be no more uncomfortable morning rains, and there will be no possibility of discomfort during the fall and winter. Your comfort is our primary priority. Therefore we constantly go above and above to assure your contentment.

Author Bio:- Aimee Grace

 Aimee is a marketing manager at EZ Plumbing & Restoration. She is very passionate in writing about discrete plumbing services and leakage detection as well as repair solutions.  Her vision is to educate people about the consequences of water and slab leaks at home or office and what they should do to repair them to avoid further water damage as well as property damage. 

Innovations have paved a way for smart devices to lead a convenient life. Plumbing industry is no different but only few people know about various tools used to fix the leakages. Stay tuned with the recent articles to know all about how to find water damage, slab leak, clogging, and ways to repair them, installation of new HVAC appliances in San Diego.

Guest Contributor: Angela

IS A FROST-PROOF HOSE BIB NECESSARY?

Are you contemplating on getting a frost proof hose bib?

The answer is YES!

A frost free hose bib is made in a way you do not have to shut off the water supply from inside of your home to prevent freeze damage from cold temperatures in the winter.

It has a valve that opens and closes when you turn the faucet on/off and cuts water supply when in the off position. This is crucial because it prevents water from sitting in the pipe and freezing! This better prevents faucet leaks, burst pipes and water damage.

However, you still need to disconnect the hose in the winer. You could potentially break the frost-free faucet if the hose is left connected because water is trapped inside of the head and pipe.

PLUMBING: COMMERCIAL VS. RESIDENTIAL

Plumbing is more complicated than most people may believe. You might encounter problems with it no matter what building you occupy. Apparently, residential and commercial plumbing share similar characteristics. However, upon closer inspection, there are just as many minor factors that significantly impact the workplace.

What Makes It Residential or Commercial Plumbing?

Residential Plumber: A residential plumber installs, fixes, fits, and maintains pipes in a residential building’s drainage system. They also work on fittings for water cooling, heating, distribution, and sanitation. Their tasks are to interpret blueprints and construction standards to design a plan, record difficulties, and evaluate drainage systems.

Imagine a single day in the life of a residential plumber who goes from house to house. They concentrate on the correct operation of a single-family home. They can unclog a clogged drain in the kitchen and understand how to fix a damaged pipe or install a water-saving toilet in the family bathroom. 

Commercial Plumber: Complex faucet and pipe installation and repair are part of commercial plumbing. It includes the construction and management of substantial waste disposal and water supply systems. It also applies to a wide range of enterprises and major housing complexes. If you’re seeking a commercial plumber, especially in a big city, be sure they’re not residential plumbers.

A commercial plumber deals with a variety of issues daily. In a multi-story office building, they would have to cope with a flooded restroom. They could build the plumbing system in a new apartment complex and be familiar with various local ordinances and regulations. Dozens may utilize commercial plumbing for hundreds of people, so it will have to manage more significant water pressures and different permits and installation processes that may not be necessary for a typical residential home.

The Distinct Differences

The Difference in Work Complexity

Commercial buildings may contain many stories, numerous sinks, and various toilets and urinals, while residential structures are ordinarily basic and easy to navigate. It requires commercial plumbers’ knowledge of a more complicated building structure. 

Daily Utilization of the Plumbing System

Daily plumbing usage in the commercial sector is higher than in the residential sector. It is due to the increased use of more clients and staff. Meanwhile, in a residential setting, only the house occupants get to use the system with fewer pipe fittings and outlets. Thus, the commercial space needs more maintenance because of the higher rate of use compared to residential.

The Plumbing System’s Efficiency

Damages can occur at any time since no system is flawless. A blocked bathroom in a commercial building may cause many problems for many people; therefore, it needs a solution right away. It’s best to choose a commercial plumber with experience because even minor damage can cause problems across the piping system’s foundation.

Durability and Size of the System

Commercial plumbing utilizes large fittings with more extended durability and high grading due to increased demand, resulting in fewer breakdown incidents due to stress and pressure. Plumbing systems for residential systems are small and utilize low-grade pipe fittings because of their low use rate.


Health Issues

As more people visit commercial establishments, particularly restaurants, there is a greater need to adhere to rigorous healthcare regulations and guarantee that your plumbing system is clean. Because there are fewer and more controlled residents, homes are easier to manage. As a result, commercial plumbing requires a variety of plumbing fittings that are simple to clean and drain rapidly.

The Possibility of Damage

Commercial plumbing systems are more vulnerable to damage than residential ones, which are less intricate. Residential plumbing damage is limited to the modest size of the system. However, commercial plumbing damage may be disastrous, primarily if your business space extends across numerous levels.

Most buildings can access their critical utility areas by installing heavy-duty general access doors, but unfortunately, not all facilities have it. A plumber should know what to do if such an instance happens and learn how to address the issue before it becomes more significant.

The Scope of Work

Commercial plumbing projects are more repetitive than residential plumbing, requiring various applications on different pipe sections. They can do it on huge facilities with equipment designed for larger applications. Residential plumbing is a typical eight-hour job, except in emergencies, but commercial plumbing may occur any day. Commercial plumbing maintenance may need to be done on weekends or holidays when staff isn’t at work.

The Difference in Water Heaters

Large storage tanks and higher gas input levels are necessary for commercial heaters, as commercial buildings have more occupants than residential residences. Commercial heater tanks are massive, holding up to 250 gallons, but residential heater tanks are often little more than 100 gallons.

Job Knowledge Prerequisites

Commercial plumbing is far more schedule-oriented. For example, repairing an original structure needs completion on time since more people rely on it, and interruptions can result in losses.  

Instances of Leakage

Because people utilize the bulk of their house plumbing daily and may notice minor leaks, diagnosing small leaks and running water in a house is more straightforward than in a commercial space. Leaks are more readily spotted in commercial buildings, especially those with numerous stories, resulting in significant leaking, water waste, and high costs.  

Drainage Services

When opposed to commercial plumbing, draining residential plumbing is comparatively simple. For example, snake drain lines in many storage facilities are complicated and time-consuming. A plumber must trace their way from each unit and certify that any obstructions are gone and cleaned down to the main sewage line.

Although there is a distinction between residential and commercial plumbing, it is advisable to find a plumber who has seen and done it all with residential and commercial plumbing problems. A skilled plumber can adapt to the circumstances and provide unrivaled plumbing services.

Guest Contributor: Chris Jackson

BEST WAYS TO ADD A PLUMBING ACCESS DOOR AND PANEL

A plumbing access panel is an access panel that has a removable door and frame whose primary function is to cover plumbing pipes, the main shut-off valve behind the ceiling, and wall surfaces making it very quick and easy to use. These essential components are present in both exterior and interior parts of the building structure. 

Protecting every plumbing component is essential to ensure no issues or damage happen to the pipes. Usually, a plumbing access panel has an easy-to-remove and place plywood door cover. However, with more innovations in today’s technology, different access panels are available in the market today, such as plumbing access panels.

Rustic or Vintage Access Panel Appearance

For a traditional way of hiding plumbing components, wooden plumbing access panels are the ideal type of installation. However, it does not offer the same strength as the metal or plastic plumbing access panel. It is perfect if the property owner wants a rustic or vintage style. The installation of this wooden access panel is mainly at the initial stage of the building construction. 

Prevent Unauthorized Opening

Preventing unauthorized entry to plumbing components is essential in every building. Thus, a sturdier access panel to cover them is a good option. A metal access panel provides a medium security level to prevent unauthorized personnel from opening the plumbing system, including the main supply valves. It is also a fire-resistant access panel that seamlessly blends through walls and ceilings. 

Ceilings

For ceiling plumbing access, installing a plumbing access hatch that closely resembles a trap door provides efficient protection from exterior elements. It also works efficiently well for plumbing. Some plumbing access hatch variations have a lock and latch for security purposes, and this feature is essential when securing the hatch from being opened illegally.

Basements and Attics 

If the building has a plumbing system in specific areas like the basement and attics, drywall access panels are perfect for this match. Sometimes the ceiling and walls have a drywall compound so incorporating metal or plastic access panels for the plumbing system is the best choice for this type of location. They are easy to install and offer safety to the building. They are also perfect for hiding water valves and cables, and wires. 

Bathrooms

In most cases, bathrooms incorporate plumbing access doors to ensure quick and easy access to the plumbing system during maintenance, inspection, and repairs. For instance, no one predicts when the tub or sink gets broken, so preparing for this kind of issue is best. Property owners can do that by incorporating plumbing access doors in the bathrooms. 

Plumbing Components

Many plumbing access panels are usually wood or steel. However, plastic access panels are convenient and efficient because of their lightweight materials. They are pretty expensive than steel or wood as they use high-quality materials and are resistant to rust and fade.

Versatility 

Access panels are ideal in several areas, such as plumbing, security systems, ceilings, and walls for versatility. There’s no need to have extensive experience to install these as it has a simple construction and design for easy installation in walls and ceilings. 

Add Plumbing Access Without Sacrificing The Aesthetics of Ceilings and Walls

Another way to hide building components like plumbing, mechanical and electrical components is by incorporating a louvered access panel. Aside from providing quick and easy access during the inspection, maintenance, and repairs, this access panel is one of the most versatile. It seamlessly blends with ceilings and walls without sacrificing its aesthetic looks. 

Access panels are essential in every building structure as they provide security, safety, easy access for every building component, and additional space for storage. Some other places require the installation following building codes. There are many access panels available in the market today; however, picking the best and most reliable one is a must. 

Guest Contributor: Chris Jackson

CRM KITCHEN REMODELING: THE BEST CRM SOFTWARE FOR KITCHEN 2021

Customer Relation Management tools are being used in almost every industry today. Even the firms that were not using it, started using it in the wake of the COVID-19 pandemic. Why? because it made remote working conditions and collaborations much more efficient and productive.

While CRM software is mostly used by various corporations, whether they are in the energy sector, development, FMCG, or real estate. Similarly, CRM software can be used for kitchen remodeling purposes as well.

Since CRM is now being designed keeping several niches in mind, for example, you have separate software for real estate CRMwhich focuses on developing leadership and can probably sync with sites like Zillow, etc. On the other hand, we now also have CRM software that focuses on specifically kitchen remodeling.

So if you are into the construction business or specifically into kitchen remodeling, here is a list of the best CRM software that you can use for kitchen remodeling in 2021.

1.   SERVICEMONSTER

This software is built specifically for the field and servicing industry. A lot of carpet cleaning businesses and other businesses like it use the software to manage their customers and businesses. And it has become popular in the servicing industry because it has proven to be profitable and extremely productive.

Let us look at some of the features that it has to offer:

·       Billing and Invoicing customers are easier with all the stored information

·       Clients management, which is the core of this software’s perks

·       Scheduling and reminders for meetings

·       E-signatures are a blessing in disguise

·       Work-order and inventory management

·       The tracking service history is extremely convenient.

So go ahead, this software is going to make it easier to complete your kitchen remodeling task easier.

2.    JOB PROGRESS

This software is known for residential contractors and tradesmen. Why? Because its tools and services cater to that particular niche. This software also enables smooth teamwork and a smooth workflow as well.

Let us look at some of the main features this software has to offer:

·       Contract management tools help with rules and services offered to a particular client.

·       Enable tracking clients

·       It is a great project management software will all tools that enable it to track development and keep updating the project.

So while this software offers a few more features than the software mentioned above, if your business needs you can use this software for your kitchen modeling projects.

3.    ACCULYNX

This one is specifically built for roofing companies, be it residential or commercial. It offers different features and tools that can help you with your business;

·       The unique feature of aerial measurement is offered by this software, which is pretty rare

·       It offers checklists, inspections, invoicing, billing, etc

·       It also offers lead management and dispatch management tools

·       Scheduling and work-order management is very user-friendly.

4.    JOBBER

This one is also catered towards the home management business, which is why it could be beneficial for you to take a look at its features and see if it works for you.

·       It provides you with a contact database and contract management tools

·       Dispatching and electronic signature is also unique about this software

·       It helps you with Quotes and Estimates

·       Scheduling and reminders about meetings etc

·       It also helps you record payment management in the field

·       It offers an online time clock that helps with meeting deadlines for a job or a task

 

5.    MARKET SHARE

Marketshare is building specifically for home improvement businesses, contractors, remodelers, etc. Here are a few highlight features of this software that you can benefit from

·       Project Management

·       Contract Management

·       Lead and Pipeline segmentation and management

·       Various prospecting tools 

·       Clients and source tracking

The software is also cheaper comparatively and offers essential features that can benefit you to the core of your kitchen remodeling business.

6.    IMPROVE IT 360

This software is built for remodeling businesses, be it small scale, medium, or large. This software is popular as it helps companies build homes, kitchens, etc and earn good profits. Let us look at a few features of this software

·       It offers management of all sorts, be it employee management,  financial, inventory or marketing management.

·       The unique feature that this software offers is training and vendor management as well.

·       Purchasing records

·       It also helps with time and expense tracking which can only improve productivity.

 

7.    LEADPERFECTION

This CRM tool is for remodeling businesses, contractors, and home improvement companies. It is a purpose-built CRM that is focused on home construction, which is why it made to our list of CRM software we recommend for kitchen remodeling.

Let us look at  a few features of this software:

·       It offers call center automation, which we can all swear by is a very efficient customer management tool

·       It also offers to canvass programs that help you with the designs etc.

·       The best thing about this software is that it can be synced with Quickbooks and many other software.

·       You can also create various reports through this software that can help you build strategies and all.

8.    JOB NIMBUS

This is our last but not the least favorite recommendation to you if you are looking for remodeling kitchens. This software is specifically built for roofers and remodeling companies. The following are only a few unique features of this application:

·       It helps with building quotes and proposals that you can forward to your clients.

·       It helps with forecasting

·       Offers sales and pipeline managements

·       It also offers contract and client management which ensures productivity among employees.

REMODEL YOUR KITCHEN USING CRM

If you are using the best software for your business, you are only ensuring productivity, huge profits, and a good clientele base. This is 2021 and you can find anything you need, even get customized software features that are important and relevant to your business.

So choose from one of the software’s mentioned above and you will see a productive rise in your business.

 Author Bio:
Dur-e-Sabih provides ghostwriting and copywriting services. Her educational background in Accountancy helps her in tackling topics ranging from career and business productivity to web development, finance, and digital marketing. She writes blog articles for Real Estate CRM.